BUOYS   Action Petroleum offers mooring buoys as well as lighted beacons for navigation. Mooring buoys consist or a hard plastic outer shell with 1/8" think-ness. Core is 3 lbs. high density polyurethane foam. All eye bolts are permanently bonded inside the buoy. 12" diameter standard. Other sizes available.

OIL BLOWERS For inflating air boom or blowing oil on quiescent waters. 2.3 HP backpack or hand held inflator. Self-contained backpack frame transgressor the majority of the weight of the units from the operators' shoulder to hips. Minimal vibration. Swivel mechanism allows air to reach angles without operator shifting position. Large capacity fuel tank for longer operating time.

 

ANCHORS Hot dip galvanized steel for better corrosion protection. Fully welded crown configuration and angle are engineered for maximum holding power and secure anchoring penetration. (Model #18R) 1/4" X 3 ft. long with 5/16"x 5' galvanized steel chain. Sizes from 8 lbs. to over 100 lbs. available.

TOW BRIDLES Three standard sizes TB-10 3/8" polypropylene rope with 3" aluminum connector. TB-25 - 5/16" galvanized 7 x 19 GAC (cable) with 10" aluminum connector. TB-30 - 5/16" galvanized 7 x 19 GAC (cable) with 25" aluminum connector.

 

 

WE ALSO OFFER

Spill Kits Action Petroleum offers both Emergency Spill Response Kits and Trucker Spill Kits.

Boom Repair Kits Ideal for on-sight repairs - Action Petroleum offers both solvent and thermal repair kits.

Rope 100 ft. twisted polypropylene rope with float.

Stakes 1" SCH 40 galvanized steel pipe with welded eye attachment - high visibility red finish.

Tide Slides Standard 48" length (6061 T6 Aluminum) Nylon rollers with stainless steel axles. Permanent or temporary mounting. Used with all connectors. High visibility yellow. Custom sizes also available.

 

 

 

 

Get where you need to go.

 

Copyright © 2004
ActionPetro.com
All rights reserved

Home | Products | Literature | Customers | About us | Dealer Inquiry